Wireless Control

DT300R Radio Equipped Advanced LocoNet Throttle

Price $233.95

A compact full featured walkaround handheld. DT300 comes with infrared LEDs and you just need to add a UR90 infrared receiver or a UR91 Universal IR/Radio receiver for low cost tetherless operation. DT300 and DT300R are not sold as part of a starter set.

Dual click encoder throttles offer the finest speed control available. The encoders can also be used to select loco addresses to run and to reverse the loco controlled by the throttle knob by double clicking the knob.
Multi-line backlit LCD display lets you see loco address, speed, direction, function status and more by simply glancing at your throttle!
Four digit operation is really simple!
Access to functions 0 through 8.
Access to switch control for controlling turnouts and other layout animation.
Universal Consisting, Advanced Consisting & Basic consisting.
Add up to 10 throttles with your Zephyr, 22 throttles to your Super Empire Builder System. Add up to 120 throttles to your Super Chief System.
2 digit & 4 digit addressing.
Program decoders from your DT300.
No battery required when operating in the tethered walkaround mode.
Turnout position reporting.
Infra-ready! Just add UR90s for tetherless operation.
Fast Clock Display

DT300 throttles are different from most throttles you have ever used because they have two sets of throttle controls on a single hand held. The left hand throttle knob & the left hand direction arrow key work together to control the speed & direction of one train while the right hand side can control another train at the same time. This arrangement is particularly useful if you are operating alone & want to have two trains under your control. The dual throttle arrangement makes consisting & helper operations simple & much more prototypical.

The DT300's throttle knobs themselves are radically different from anything you've probably ever used before. The throttle knobs are click encoders rather than potentiometers. What this means to you is that the throttle knob rotates more than one turn from 0 to full speed. The number of rotations is based on whether you have the system set up for 14, 28 or 128 speed step operation. Encoder Knobs give you incredibly fine speed control & when you select another loco, the throttle knob position does not change the speed of the new loco selected. No more rushing to adjust the throttle to match the loco's speed! Try it for yourself: install one of our decoders (128 speed step of course) in a locomotive that runs well & run it with a DT300. You won't believe the slow speed performance! (Note: If you prefer pushbutton operation, you can use the up & down arrow keys to change the locomotive's speed.)

In addition, the DT300’s throttle knobs can be used to select loco addresses to run and to reverse the direction of the loco controlled by the throttle.

DT400R Super Radio Throttle

Price $262.95

Be careful what you ask for. . . it’s in the DT400 Super Throttle!

Simple to use with any Digitrax LocoNet System including Zephyr!
User Friendly Multi-line backlit display with easy to read icons and messages
Dual throttle controls for running two trains at a time
Click encoders give extra fine speed control and direction control, too!
Full numeric keypad
Direct access to functions 0-12 with DCS50 or DCS100 command stations
Direct access to functions 0-8 with DB150 command station
Single key access to most common throttle tasks.
Infra-Ready
Find Key for use with transponder equipped locos & layouts
Built in flashlight for reading paperwork and loco/car numbers in darkened layout rooms
No more throttle display time-outs!

UR90 IR Receiver Unit

Price $52.95

Features:

The UR90 is the IR receiver unit. The UR90 also looks similar to a UP5 and is mounted in the fascia of the layout. The UR90 is simply an addition to your existing LocoNet so no additional wiring is needed. The UR90 will support approximately 10 Infra-Ready throttles (DT100, DT300 and DT400 series). Most layouts will need more than one UR90 because IR is line of sight and the receivers must be able to "see" the IR signal. UR90 & UR91 can be used together on your layout to provide both wireless methods at the same time. If you already have DT300's or DT400’s the UR90 is the only thing you have to add to get infra red throttle operation.

UR91 Radio/IR Receiver Unit

Price $170.95

Features:

The UR91 is the radio/IR receiver unit. The UR91 looks similar to a UP5 and is mounted in the fascia of the layout. The UR91 is simply an addition to your existing LocoNet so no additional wiring is needed. The antennas are concealed under the layout. The UR91 will support approximately 10 radio throttles. Most layouts will need just one UR91 but in some large configurations a second unit may be needed to compensate for "dead" spots. This unit is also equipped for concurrent infrared operation using all Digitrax IR throttles, too!

UT4R Radio Equipped Utility Throttle

Price $162.95

Features:

The UT4R Radio Equipped Utility Throttle is coming soon! Cost effective, simple to use throttles let everyone visiting your layout run trains! Large knob for speed control and 3 position toggle switch for direction control and braking. 4 digit addressing. Use with any LocoNet System. Control Functions F0-F12-great for sound equipped locomotives.